Printing on Specialty Media
Phaser® 8560/8860 Printer
3-37
4. Insert the tray into the tray slot, and then push it completely into the printer.
5. On the control panel:
a. Select
Paper Tray Setup, and then press the OK button.
b. Select either
Tray 2 Paper Type, Tray 3 Paper Type, or Tray 4 Paper Type, and then
press the OK button.
c. Select
Transparency, and then press the OK button.
6. In the printer driver, select either Transparency as the paper type or the appropriate tray
as the paper source.
8860p-104
To Next Page
Loading...
