Printing on Specialty Media
Phaser® 8560/8860 Printer
3-44
4. Insert the tray into the tray slot, and then push it completely into the printer.
5. On the control panel:
a. Select
Paper Tray Setup, and then press the OK button.
b. Select either
Tray 2 Paper Type, Tray 3 Paper Type, or Tray 4 Paper Type, and then
press the OK button.
c. Select
Envelope and then press the OK button.
6. In the printer driver, select either Envelope as the paper type or the appropriate tray as the
paper source.
8860p-127
To Next Page
Loading...
