4. While holding the tabs on the new staple cartridge, push in the cartridge until it stops.
Note: Ensure that the marks are aligned.
5. Push the Saddle Stitch Unit 3 into the finisher gently, until the unit stops.
6. Close the finisher front cover.
REPLACING THE STAPLE REFILL CASSETTE FOR SADDLE STITCHING
When you run out of staples for the saddle-stitcher, you can replace the staple cassette without having to replace
the entire staple cartridge. To replace the staple cassette with a refill:
1. Remove the staple cartridge as directed in Replacing the Booklet Staple Cartridge for Saddle Stitching.
Xerox
®
PrimeLink
®
B9100/B9110/B9125/B9136 Copier/Printer User Guide 427
Production Ready Finishers
To Next Page
Loading...
