1. Power off the printer.
2. To remove the Wireless Network Adapter Port Cover, press down on the latch, then pull the cover away from the
printer.
3. Remove the packaging from the Wireless Network Adapter.
4. To install the Wireless Network Adapter, follow the procedure defined on the instruction sheet provided with the
Wireless Network Adapter.
Note: Pulling on the adapter can damage it. Once installed, remove it only as needed, and as directed in the
Wireless Network Adapter removal instructions. For more information, refer to Removing the Wireless
Network Adapter.
40 Xerox
®
VersaLink
®
B600/B610 Printer User Guide
Getting Started
To Next Page
Loading...
