EasyManuals Logo
Home>Xerox>All in One Printer>VersaLink B71 Series

Xerox VersaLink B71 Series User Documentation

Xerox VersaLink B71 Series
234 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #191 background imageLoading...
Page #191 background image
Note: Each drum cartridge includes installation instructions.
Printer Status Message
Cause and Solution
Reorder Drum Cartridge The drum cartridge is nearing the end of its life.
Order a new drum cartridge.
Replace Drum Cartridge The drum cartridge has reached the end of its life.
Replace the drum cartridge with a new one.
Replacing Staples in the Integrated Office Finisher
If the printer has an optional finisher installed, the control panel displays a message when a staple
cartridge is empty and needs replacement. Locate then use the procedure for the finisher installed on
your printer.
Caution: Do not perform this procedure while the printer is printing.
1. Open the finisher front door.
2. To remove the staple cartridge, grasp the orange handle, then pull it firmly toward you.
3. Check inside the finisher for any loose staples and remove them.
191

Table of Contents

Other manuals for Xerox VersaLink B71 Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Xerox VersaLink B71 Series and is the answer not in the manual?

Xerox VersaLink B71 Series Specifications

General IconGeneral
BrandXerox
ModelVersaLink B71 Series
CategoryAll in One Printer
LanguageEnglish

Related product manuals