Xerox VersaLink B7125 User Manual (English)

Other manuals for Xerox VersaLink B7125

Questions and Answers:

L
Lauren AdamsAug 8, 2025
What to do if my Xerox VersaLink B7125 All in One Printer does not print?
- L
  Laura AlvarezAug 8, 2025
  If your Xerox All in One Printer isn't printing, first, press the Power/Wake button on the control panel in case the printer is in Power Saver mode. Also, check the control panel for any error messages (Status LED blinking amber) and follow the instructions to clear them. Ensure that the printer has paper loaded in the tray. Replace any empty toner cartridges, the drum cartridge if it has reached its end of life, or the toner waste container if it is full.
D
Dr. Melissa JordanAug 13, 2025
How to fix Xerox VersaLink B7125 All in One Printer that does not power on?
- J
  James Gates Jr.Aug 13, 2025
  If your Xerox All in One Printer does not power on, make sure the power switch is in the On position after opening the front door, and press the Power/Wake button on the printer control panel. Ensure the power cord is securely plugged into the outlet, using the provided bracket to secure it. Test the outlet with another appliance or try a different outlet. Verify that the power source matches the printer's electrical specifications.
S
Scott HarrisAug 18, 2025
Why does my Xerox VersaLink B7125 reset or power off frequently?
- M
  Michael SmithAug 18, 2025
  If your Xerox All in One Printer resets or powers off frequently, ensure the power cord is correctly plugged into both the printer and the outlet, securing it with the provided bracket. If a system error occurred, power the printer off and on again. Print the Error History Report. Connect the printer directly to a suitable outlet, avoiding uninterruptible power supplies or power strips shared with other high-power devices.
S
sbartonAug 22, 2025
What to do if my Xerox VersaLink B7125 All in One Printer is making unusual noises?
- T
  Thomas TaylorAug 23, 2025
  If your Xerox All in One Printer is making unusual noises, power off the printer and check for any obstructions or debris inside. If you cannot remove it, contact your Xerox representative.
M
martinezmorganAug 28, 2025
What to do if paper tray does not close in Xerox VersaLink B7125?
- A
  Ashley GibbsAug 28, 2025
  If the paper tray on your Xerox All in One Printer does not close fully, power off the printer and check for any debris or obstructions blocking the tray. If you cannot remove it, contact your Xerox representative.
A
Abigail DaySep 1, 2025
What to do if condensation has formed inside the Xerox VersaLink B7125 All in One Printer?
- W
  William CurtisSep 1, 2025
  If condensation has formed inside your Xerox All in One Printer, allow the printer to operate for several hours at room temperature. Reduce the humidity in the room or move the printer to a location where the temperature and relative humidity are within the operating specifications.

Xerox VersaLink B7125 Specifications

General

Print Technology	Laser
Print Speed	Up to 25 ppm
Print Resolution	Up to 1200 x 1200 dpi
Copy Resolution	Up to 600 x 600 dpi
Scan Resolution	Up to 600 x 600 dpi
Duplex Printing	Yes
Paper Output	250 sheets
Fax	Optional
Functions	Print, Copy, Scan
Scan Type	Color Flatbed Scanner
Automatic Document Feeder	100 sheets
Connectivity	USB, Ethernet
Processor	1.05 GHz
Memory	2 GB
Hard Drive	320 GB
Media Sizes Supported	A4, A5, B5, Letter, Legal
Scan Destinations	Email, USB, Network
Duty Cycle	Up to 107, 000 pages/month