5. Touch Original Document, then select the option that matches your original documents.
• 1-Sided Original: This option scans only one side of the original image and produces 1-sided
output files.
• 2-Sided Original: This option scans both sides of the original image.
• 2-Sided, Rotate Side 2: This option scans both sides of the original image, rotating the
second side.
6. If a cover sheet is required, touch the Cover toggle button, then adjust Paper Supply and Print
On Cover as needed.
7. If your printer has a finisher installed, select a staple or fold option.
8. To increase or reduce the amount of white space in the margin between the two pages, touch
Gutter Margin, then touch the Plus icon (+) or the Minus icon (-).
9. To print booklets containing an odd number of pages, touch Odd Page Management. To specify
the location of extra blank pages, touch Blank Page Front or Blank Page Back, as needed.
10. To set the number of sheets in the booklet, touch the Sheets per Signature toggle button. To
adjust the number of sheets, touch Plus icon (+) or Minus icon (-), as needed.
11. Touch OK.
Adding a Front Cover
You can print the first page of your copy job on different paper, such as colored or heavyweight
paper. The printer selects the special paper from a different tray. The cover can be blank or printed.
To add a front cover to your copy job:
1. At the printer control panel, press the Home button.
2. Touch Copy.
3. Touch Front Cover.
4. Touch the Front Cover toggle button.
Note: If Paper Supply is set to Auto Select, a notification appears confirming that the
Paper Supply has been changed to Tray 1.
5. Touch Printing Options, then select an option.
• Blank: This option inserts a blank front cover.
• Print on Side 1 Only: This option prints on the front side of the cover only.
• Print on Side 2 Only: This option prints on the back side of the cover only.
• Print on Both Sides: This option prints on both sides of the cover.
6. Touch Paper Supply, then select the required paper source.
7. Touch OK.
Erasing the Edges of Copies
You can erase content from the edges of your copies using the Edge Erase feature. You can specify
the amount to erase on the right, left, top, and bottom edges.
To erase the edges of copies:
100
To Next Page
Loading...
Need help?
General
