Xerox VersaLink B7135 User Manual

6. Insert the front side of the new staple pack into the staple cartridge, then push the rear side into
the cartridge.
7. Grasp the new staple cartridge by the orange handle, then insert the cartridge into the stapler
assembly until it clicks.
8. Close the finisher front door.
Replacing Staples in the Booklet Maker of the Office Finisher
Caution: Do not perform this procedure while the printer is printing.
1. Open the booklet maker side cover.
194

Xerox VersaLink B7135 Specifications

General

Brand	Xerox
Model	VersaLink B7135
Category	All in One Printer
Language	English