Xerox VersaLink C7000 - Page 18

Customer Expectation and Installation Guide 14
Finishing Specifications
Stacker
Output Trays (Standard)
Stacking Trays
 Dual Offset Catch Tray – up to 250 sheets each
 Lower Tray offsets
Integrated Office Finisher (Optional)
Stacking Tray
500 sheets of 20 lb. bond / 80 gsm – 8.5 x 11 in. / A4 or 250 sheets of 20 lb. bond / 80 gsm – 11 x 17 in. / A3
Sizes
3.5 x 3.9 in. to 11.7 x 17 in. / 89 x 98 mm to 297 x
432 mm
Weights
16 lb. bond to 80 lb. cover / 60 to 256 gsm
Stapling
 Single
 Auto stapling: 50 sheets maximum: Letter / A4 / B5-size sheets (less than 90 gsm or (2) 220 gsm covers)
 30 sheets maximum: Legal / Tabloid / A3 / B4-size sheets (less than 90 gsm or (2) 220 gsm covers)
 Max paper weight that can be stapled is 220gsm. Performance of stapling 50 sheets of paper exceeding 90gsm cannot be
guaranteed.
 Max paper size that can be stapled is 11x17” (A3)
 Offset between sets is available.
 Staple mode: Offset is supported unless paper is longer than 297mm or Letter SEF is used.
 Non-staple mode: Offset of sheets larger than
190 x 148mm is supported.
Office Finisher LX (Optional)
Capacity
Stacking Tray: 2,000 sheets unstapled or 1,000 sheets single stapled or 750 sheets dual stapled (8.5 x 11 in. / A4)
Center Lower Tray is not available when Office Finisher LX is installed
Sizes
7.2 x 8.3 in. to 11.7 x 17 in. / 182 x 210 mm to
297 x 432 mm
Weights
16 lb bond to 80 lb cover / 60 to 256 gsm
Multi-position
Stapling
50 sheets of 24 lb. bond / 90 gsm
Hole Punch
(Optional)
North America:
Europe:
 2-3 Hole Punch
 2-4 Hole Punch
 Up to 65 lb cover (176gsm) available to right center tray
Booklet Maker for Office Finisher LX (Score/Crease, Saddle-stitch Staple) (Optional)
7
Capacity
40 booklets (2-15 sheets per booklet – 20 lb. / 80 gsm or less)
Sizes
 Letter – 8.5 x 11 in. / A4 SEF
 Legal – 8.5 x 14 in. / B4 SEF
 Ledger – 11 x 17 in. / A3 SEF
Saddle-stitch
Stapling
 2-15 sheets / 8-60 page booklet
 16 lb. bond to 24 lb. bond / 60 to 90 gsm
Score / Crease
 1-15 sheets / unstapled
 Creases up to 28lb (105 gsm)
Stapler
Convenience Stapler (Optional - Includes Work Surface)
Capacity
50-sheet stapling
 5,000 staples
 Requires a separate outlet
7
Roller marks may be visible on output sheets when coated papers are output to the Stacker