Xerox VersaLink C7000 - 4 Installation; Roles and Responsibilities; Primary Customer C7020;C7025;C7030 Applications

I N S T A L L A T I O N V E R S A L I N K ® C 7 0 0 0 S E R I E S
Customer Expectation and Installation Guide 19
4 Installation
Roles and Responsibilities
This section is key to clearly state Xerox and the customer roles and responsibilities and necessary actions.
Responsibility Matrix
Action
Customer
Xerox
Ensure adequate space and power to configure the C7020/C7025/C7030/C7000
X
Unpack system / components
X
Install Envelope Tray
X
Connect all System Components prior to powering up the system
X
Ensure network configuration
X
Confirm network integrity
X
Acquire and install client software including print drivers
X
Configure Workflow Scanning
X
Run initial software diagnostics when directed
X
Monitor and adjust as required
X
Load any additional fonts
X
Procure BNC transceiver for network connection (if needed)
X
Order and replace Kits (Drum cartridges, Second Bias Transfer Roll, transfer belt cleaner, and Waste Toner Cartridge,
etc.) as needed.
X
Provide Help Line support
X
Provide spared parts
X
Provide service
X
Primary Customer C7020/C7025/C7030/C7000- SFP Applications:
_________________________________________________________________________________________________________________________
_________________________________________________________________________________________________________________________
_________________________________________________________________________________________________________________________
Special considerations or performance limitations identified by Xerox and agreed to by the customer:
_________________________________________________________________________________________________________________________
_________________________________________________________________________________________________________________________
_________________________________________________________________________________________________________________________