Accessing the Printer
LLooggggiinngg IInn
Logging in is the process by which you identify yourself to the printer for authentication. If
authentication is set, to access printer features, you log in with your user credentials.
LLooggggiinngg IInn aatt tthhee CCoonnttrrooll PPaanneell
1. At the printer control panel, press the Home button.
2. Touch Log In.
3. Type the User Name using the keypad, then touch Enter.
4. If prompted, enter the password, then touch Enter.
Note: For more information on logging in as system administrator, refer to the System
Administrator Guide at www.xerox.com/office/VLC70XXdocs.
5. Touch OK.
Note: To access each password-protected service, enter the User Name and password.
CCoonnvveenniieennccee AAuutthheennttiiccaattiioonn
When Convenience Authorization is enabled, users swipe a pre-programmed identification card
through a Proximity Card Reader at the control panel. To use this method, purchase and install a USB
card reader and an authentication server that supports the Xerox
®
Convenience Authentication API.
SSmmaarrtt CCaarrdd
When a Common Access Card system is installed on your Xerox device, access to the printer requires
the use of a Smart Card. There are several models of card readers that are compatible with your
device. To access the printer, insert the pre-programmed identification card into the reader, or place
your card on the reader. If extra security credentials are required, enter the login information at the
control panel.
For more information about configuring a Common Access Card system on your device, refer to the
Xerox
®
VersaLink
®
Common Access Card System Configuration Guide at www.xerox.com/office/
VLC70XXdocs.
Xerox
®
VersaLink
®
C70XX Color Multifunction Printer
User Guide
37
Getting Started
To Next Page
Loading...
Need help?
General
