EasyManuals Logo

Xerox versalink C7030 User Manual

Xerox versalink C7030
332 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #230 background imageLoading...
Page #230 background image
Probable Causes Solutions
The printer cable is disconnected. If the Status LED does not flash once after you send
a print job, check the connection between the printer
and the computer.
There is a network-connectivity issue. If the printer is connected to a network:
1 Verify that the Ethernet cable is connected to the
printer.
2 On the printer Ethernet connector, verify that the
green LED is On. If the green LED is not lighted,
reseat both ends of the Ethernet cable.
3 Examine the TCP/IP address in the
Communication section of the Configuration
Report. For more information, refer to Printing the
Configuration Report.
4 If the TCP/IP address is 0.0.0.0, the printer needs
more time to acquire an IP address from the
DHCP server. Wait 2 minutes, then print the
Configuration Report again.
5 If the TCP/IP address is unchanged, or begins
with 169, contact your network administrator.
There is a wireless network setup or connectivity
issue.
Verify that the Wireless Network Adapter is installed
and properly configured. For more information, refer
to Connecting to a Wireless Network.
PPrriinnttiinngg TTaakkeess TToooo LLoonngg
Probable Causes Solutions
The printer is set to a slower printing mode. For
example, the printer is set to print on Heavyweight
paper or Envelopes.
It takes more time to print on certain types of special
paper. Ensure that the paper type is set properly in
the print driver and at the printer control panel. For
details, refer to Print Speed.
The printer is in Power Saver mode. It takes time for printing to start when the printer is
coming out of Power Saver mode.
The way the printer was installed on the network
could be an issue.
Determine if a print spooler or a computer sharing
the printer is buffering all print jobs and then
spooling them to the printer. Spooling can slow print
speeds. To test the speed of the printer, print some
information pages such as the Demonstration Print.
For details, refer to Printing Information Pages. If the
page prints at the rated speed of the printer, there
could be a network or printer installation issue. For
more help, contact the system administrator.
230
Xerox
®
VersaLink
®
C70XX Color Multifunction Printer
User Guide
Troubleshooting

Table of Contents

Other manuals for Xerox versalink C7030

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Xerox versalink C7030 and is the answer not in the manual?

Xerox versalink C7030 Specifications

General IconGeneral
Print TechnologyLaser
Automatic DuplexingYes
Scan Resolution600 x 600 dpi
FunctionsPrint, Copy, Scan, Fax
Mobile PrintingApple AirPrint, Google Cloud Print, Mopria, Xerox Print Service Plug-in for Android
Fax Speed33.6 Kbps
Operating System CompatibilityWindows, Mac OS, Linux
Print SpeedUp to 30 ppm
Print Resolution1200 x 2400 dpi
ConnectivityUSB, Ethernet, Wi-Fi
Copy SpeedUp to 30 ppm color / black & white
Processor1.05 GHz
Memory2 GB
Paper SizesA3, A4, A5, B5
Scan SpeedUp to 55 ipm
Duplex Scan SpeedUp to 28 ipm color / 28 ipm black & white
Dimensions590 x 640 x 1130 mm
Maximum Paper SizeA3

Related product manuals