Xerox Versant 4100 Press - Page 15

Xerox Customized Envelope Feeder – Problem Solving Guide 3-5
Here are some examples of recommended O-ring assembly locations when feeding non-standard
stock
Off-centered O-ring Assembly Location - Avoids Hitting Windows on Windowed Envelopes

O‐ringAssembliesLocated
DirectlyovertheBelts:
DModelDefaultPosition
O‐ringAssemblieslocatedpartiallyover
theBelts:Idealwhenusingmany
differentenvelop etypes/substrates
NOTE:O‐ringseparatoradjustmentwill besignificantlymoresensitiveintheconfigurationsshownabove.