Loading paper
WorkCentre 5019/5021
User Guide
4-14
The paper size in the paper size display area blinks and the machine enters paper size setting mode.
3. Press the Size (Press 2sec) button to select the size and orientation of the paper loaded in the
selected tray.
The selected paper size and orientation are displayed in the machine status diagram.
The Start button lights up blinking during the settings.
4. Press the Start button to confirm the settings.
To exit paper size setting mode without saving the settings, press the Clear All button or the Stop
button.
Note Be sure to press the Start button. Otherwise the settings of paper size and orientation are
canceled and remain the previous settings.
To Next Page
Loading...
Need help?
General
