3 Copy
56
Original Type
This feature allows you to copy at optimum image quality by selecting the type of the
original documents.
1.
Select [Original Type] on the
[Image Quality] screen.
2.
Select the required option.
3.
Select [Save].
Text
Select this option to copy documents that contain text only, where the text must be
copied crisply.
Photo & Text
Select this option to copy documents that contain both text and photographs. Text and
photographs are automatically distinguished, and an appropriate quality mode is
selected for individual areas.
Photo
Select this option to copy documents that contain photographs only.
Light Text
Select this option to copy documents that contain faint text, such as that written in
pencil.
Text on See-Through Paper
Select this option to copy documents that use see-through paper.
NOTE: [Text on See-Through Paper] is available only when [System Settings] > [Copy
Service Settings] > [Copy Control] > [Original Type - See-Through Paper] is enabled.
Image Options
This feature allows you to adjust the brightness and sharpness levels for copying
documents.
1.
Select [Image Options] on the
[Image Quality] screen.
2.
Select the required levels.
3.
Select [Save].
Lighten/Darken
Allows you to adjust the copy density using seven levels between [Lighten] and
[Darken]. The copy density increases the nearer the level is to [Darken], and decreases
the nearer the level is to [Lighten].
Sharpness
Allows you to adjust the copy sharpness using five levels between [Sharpen] and
[Soften]. The sharpness of contours increases the nearer the level is to [Sharpen], and
decreases the nearer the level is to [Soften].
To Next Page
Loading...
Need help?
General
