Troubleshooting
240 Xerox
®
WorkCentre
®
6655/6655i Color Multifunction Printer
User Guide
Symptom Cause Solution
Slanted printing
The paper guides are not set
correctly.
Reset the paper tray guides. For details,
see Loading Paper on page 58.
Incomplete fusing
Toner appears to be missing from
the print or is easy to rub off.
• Verify that the paper you are using
is the correct type for the printer
and is loaded properly.
• Verify that the paper loaded in the
tray matches the paper type
selected at the control panel and in
the print driver.
• Set the paper type to one type
heavier.
To verify paper type at the control
panel, press Machine Status, then
touch Machine Information > Paper
Tray Status. For more information
about paper weights, see the Offset
image section of this table.
To Next Page
Loading...
