Xerox WorkCentre 6655i/X

Questions and Answers:

D
Daniel PatrickSep 4, 2025
Why has condensation formed inside my Xerox Printer?
- M
  Mark RiveraSep 4, 2025
  If condensation has formed inside your Xerox Printer, it's likely because the printer has been sitting in a cold room or the relative humidity of the room is too high. Allow the printer to acclimate for several hours before operation and ensure it operates at room temperature. Also, reduce the humidity in the room or move the printer to a location where the temperature and relative humidity are within the operating specifications.
S
Spencer YoungSep 3, 2025
What to do if paper tray fails to close on Xerox Printer?
- J
  Jeffery MolinaSep 3, 2025
  If the paper tray on your Xerox Printer fails to close, it may be due to a few reasons. Check that the paper tray lift plate is locked down by pushing down on the paper stack at the back of the tray until it locks. If the tray is extended for legal size paper, it will protrude when inserted into the printer. Also, ensure that no debris or objects are blocking the tray. Finally, adjust the paper guides in the tray to match the size of the paper.
A
Alexa CraigSep 1, 2025
Why is my Xerox Printer making unusual noises?
- J
  Jeremy DavisSep 1, 2025
  If your Xerox Printer is making unusual noises, there may be an obstruction or debris inside the printer. Turn off the printer and remove any obstructions or debris that you can access.
N
Nicholas OconnorAug 31, 2025
Why does my Xerox Printer reset or turn off frequently?
- D
  David BishopAug 31, 2025
  If your Xerox Printer frequently resets or turns off, the issue might stem from a few causes. Ensure the power cord is correctly plugged into both the printer and the outlet. If a system error occurred, turn the printer off and on again. You can print the Error History from the Information Pages of the Printer Setting Utility. Avoid connecting the printer to an uninterruptible power supply; instead, use a suitable outlet. Also, make sure the printer isn't sharing a power strip with other high-power devices; plug it directly into the outlet or a dedicated power strip.
K
Kimberly SanchezAug 29, 2025
How to fix automatic 2-sided printing problems on Xerox All in One Printer?
- K
  Kathryn RogersAug 29, 2025
  To fix automatic 2-sided printing problems on your Xerox All in One Printer: * Ensure that you are using a supported paper size and weight for 2-sided printing. Note that envelopes and labels cannot be used for 2-sided printing. * In the print driver Properties, select 2-Sided Print on the Paper/Output tab.
L
Lori StevensAug 27, 2025
Why does my Xerox All in One Printer reset or turn off frequently?
- J
  Jeffrey DaviesAug 28, 2025
  Your Xerox All in One Printer might reset or turn off frequently due to: * The power cord not being plugged into the outlet correctly. Turn off the printer, ensure the power cord is correctly plugged into both the printer and the outlet, then turn the printer back on. * A system error. Turn the printer off, then on again. * The printer being connected to an uninterruptible power supply. Turn off the printer and connect the power cord to a suitable outlet. * The printer being connected to a power strip shared with other high-power devices. Plug the printer directly into the outlet or into a power strip not shared with other high-power devices.
J
Jasmine WalshAug 27, 2025
Why is automatic 2-sided printing not working on my Xerox Printer?
- J
  James NashAug 27, 2025
  If you're experiencing issues with automatic 2-sided printing on your Xerox printer, it could be due to unsupported or incorrect paper. Ensure that you are using a supported paper size and weight for 2-sided printing. Remember that envelopes and labels cannot be used for 2-sided printing. Also, verify that the '2-Sided Print' option is selected in the print driver properties under the Paper/Output tab.
J
Jessica RuizAug 25, 2025
Why is my Xerox Printer printing from the wrong tray?
- S
  Sherry DayAug 25, 2025
  If your Xerox printer is printing documents from the wrong tray, the application and print driver may have conflicting tray selections. Check the tray selected in the print driver. Go to the page setup or printer settings of the application from which you are printing. Set the paper source to match the tray selected in the print driver or set the paper source to Automatically Select. To have the print driver select the tray, set the tray used as the paper source to Auto Selection Enabled.

Xerox WorkCentre 6655i/X Specifications

General

Scan Resolution	Up to 600 x 600 dpi
Fax Speed	33.6 Kbps
Copy Resolution	Up to 600 x 600 dpi
Functions	Print, copy, scan, fax
Connectivity	Ethernet, USB, Wi-Fi
Operating System Compatibility	Windows, macOS, Linux
Paper Input	bypass tray
Duplex Printing	Automatic
Mobile Printing	Apple AirPrint, Google Cloud Print