Xerox WorkCentre 7220 User Manual

Troubleshooting
244 Xerox
®
WorkCentre
®
7220/7220i/7225/7225i Color Multifunction Printer
User Guide
• Avoid paper that is curled, torn, moist, creased, or folded.
• To separate the sheets before loading into the tray, fan the paper.
• Observe the paper tray fill line; never overfill the tray.
• Remove transparencies from the output tray immediately after printing.
• Adjust the paper guides in all trays after inserting the paper. A guide that is not properly adjusted
can cause poor print quality, misfeeds, skewed prints, and printer damage.
• After loading the trays, select the correct paper type and size on the control panel.
• When printing, select the correct type and size in the print driver.
• Store paper in a dry location.
• Use only Xerox paper and transparencies designed for the printer.
Avoid the following:
• Polyester coated paper that is designed specially for inkjet printers.
• Highly glossy or coated paper.
• Paper that is folded, wrinkled, or excessively curled.
• Fanning transparencies before loading in the paper tray.
• Loading more than one type, size, or weight of paper in a tray at the same time.
• Loading hole punched paper or paper with folded corners or staples in the document feeder.
• Overfilling the paper trays.
• Allowing the output tray to overfill.
• Allowing the output tray to fill with more than a few transparencies.
Refer to the control panel Paper and Media Information Pages for information on supported paper, or
see Supported Paper on page 50.

Xerox WorkCentre 7220 Specifications

General

Functions	Print, Copy, Scan, Fax
Print Technology	Laser
Color Output	Color
Copy Resolution	Up to 600 x 600 dpi
Scan Resolution	Up to 600 x 600 dpi
Fax Speed	33.6 Kbps
Standard Paper Capacity	1, 090 sheets
Duplex Printing	Yes
Memory	2 GB
Hard Drive	160 GB
ADF Capacity	50 sheets
Type	All-in-One
Print Speed	20 ppm
Copy Speed	20 cpm
Connectivity	USB 2.0, Ethernet
Network Connectivity	Ethernet
Operating System Compatibility	Windows, Mac, Linux