EasyManuals Logo

Xerox WorkCentre 7220 User Manual

Xerox WorkCentre 7220
302 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #90 background imageLoading...
Page #90 background image
Printing
90 Xerox
®
WorkCentre
®
7220/7220i/7225/7225i Color Multifunction Printer
User Guide
Sending a Secure Print Job
1. On the Printing Options tab, from the Job Type list, select Secure Print.
2. Type a 410 digit passcode for the Secure Print job.
3. In the Confirm Passcode field, type the passcode again.
Notes:
If you do not supply a passcode, the printer assigns a passcode and displays it in the Passcode
Required window. You can use the passcode supplied by the printer, or you can type your own
passcode to use in the Secure Print window.
The passcode is associated with your user name. After you set a passcode, it becomes the
default passcode for any print job that requires a passcode on all Xerox
®
printers. You can reset
the passcode at any time from any window that contains the passcode.
4. Click OK.
5. Verify that the paper is the correct size, type, and weight. If not, change the paper settings.
Note: To select the paper for your print job, click Paper > Select By Tray.
6. Select an option for 2-sided printing.
7. If your printer has a finisher installed, click the arrow to the right of Finishing, then select a stapling
option. The image next to Stapling shows the staple position.
8. Select a print-quality mode.
9. Select an output destination.
10. Select another tab or click OK.
11. To send the job to the printer, in the Print window, select the number of copies to print, then click
OK or Print.
Releasing a Secure Print
1. At the control panel, press the Job Status button.
2. Touch Held Print Jobs or Secure Print Jobs, then select a folder. For details, see Secure Print on
page 89.
3. Use the keypad to enter the passcode that you assigned to the print job, then touch OK.
4. Touch the corresponding print job in the list, then touch Print.
Deleting a Secure Print
1. At the control panel, press the Job Status button.
2. Touch Held Print Jobs or Secure Print Jobs, then select a folder. For details, see Secure Print on
page 89.
3. Use the keypad to enter the passcode that you assigned to the print job, then touch OK.
4. Touch the corresponding print job in the list, then touch Delete.

Table of Contents

Other manuals for Xerox WorkCentre 7220

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Xerox WorkCentre 7220 and is the answer not in the manual?

Xerox WorkCentre 7220 Specifications

General IconGeneral
FunctionsPrint, Copy, Scan, Fax
Print TechnologyLaser
Color OutputColor
Copy ResolutionUp to 600 x 600 dpi
Scan ResolutionUp to 600 x 600 dpi
Fax Speed33.6 Kbps
Standard Paper Capacity1, 090 sheets
Duplex PrintingYes
Memory2 GB
Hard Drive160 GB
ADF Capacity50 sheets
TypeAll-in-One
Print Speed20 ppm
Copy Speed20 cpm
ConnectivityUSB 2.0, Ethernet
Network ConnectivityEthernet
Operating System CompatibilityWindows, Mac, Linux

Related product manuals