WorkCentre 7220-7225 Information Assurance Disclosure Paper
Ver. 1.0, January 2013 Page 21 of 61
2.8.2. Ports
The following table summarizes all potentially open ports and subsequent sections discuss each port in more detail.
All ports can be disabled if not needed under control of the system administrator.
Default
Port #
Type Service name
22
TCP SFTP
23
UDP NTP
25
TCP SMTP
53
UDP DNS
68
UDP DHC ACK Response to DHCP
80
TCP HTTP
88
UDP Kerberos
110
TCP POP3 client – used for IFax
137
UDP NETBIOS- Name Service
138
UDP NETBIOS-Datagram Service; SMB filing and Scan template retrieval
139
TCP NETBIOS Session Service - SMB Authentication, SMB filing
161
TCP/UDP SNMP
389
UDP LDAP
396
TCP Netware
427
UDP SLP
443
TCP HTTPS – HTTP over SSL/TLS
445
TCP Microsoft-DS
500
TCP ISAKMP
515
TCP LPR
631
TCP IPP
1900
TCP/UDP SSDP
1901
UDP SSDP
3003
TCP http/SNMP reply
3702
TCP/UDP WSD Discovery
4500
TCP/UDP IKE Negotiation Port for IPSec
5353
TCP/UDP Multicast DNS
5354
TCP Multicast DNS Responder IPC
5909-
5999
Remote UI Remote Access to Local UI. Ports randomized for security.
9100
TCP raw IP
28002
TCP WS: Scan Template Management, Scan Extension, Xerox Secure Access,
Authentication & Authorization Configuration, Device Configuration
53202
TCP WSD Transfer
53303
TCP WSD Print
53404
TCP WSD Scan
61100
TCP WS: XEIP Proxy Configuration
61200
TCP WS: User Interface Configuration
61400
TCP WS: Digital Certificate Management
61502
TCP WS: Extensible Service Registration
61503
TCP WS: Session Data
Table 7 Network Ports
Please note that there is no ftp port in this list. ftp is only used to export scanned images and to retrieve Scan Job
Templates, and will open port 21 on the remote device. An ftp port is never open on the controller itself.
To Next Page
Loading...
Need help?
General
