Xerox WorkCentre PE16 Service Manual

6-8
ALIGNMENT & ADJUSTMENTS
Service Manual
July 2003 WorkCentre PE16
6.2.2.3 JAM1 (In the Fuser Area of Around the Toner Cartridge Area)
NOTE : The fuser area is hot. Be careful when removing paper from the machine.
1) Open the front cover and remove the toner cartridge.
2) Remove the jammed paper by gently pulling it
straight out.
3) Replace the toner cartridge and close the front cover.
Printing automatically resumes.

Xerox WorkCentre PE16 Specifications

General

Brand	Xerox
Model	WorkCentre PE16
Category	All in One Printer
Language	English