11 Setups
248 Xerox CopyCentre/WorkCentre/WorkCentre Pro 123/128 User Guide
With [Fax] selected:
Item Description Default
Fax Number Enter a fax number (up to 128 digits). –
Recipient Name Enter a recipient name (up to 18
characters).
–
Index Enter a single alphanumeric character to
use as a keyword for searching the
Address Book.
–
Relay Station Setup Specify whether or not the registered
Address Number is to be identified as an
initiating relay broadcast station when the
machine is used as a relay broadcast
station.
NOTE: Before using the Relay Broadcast
feature, enter the Address Numbers for
initiating stations regardless of the
initiating method from the stations.
Off
Communication Mode Select a communication mode from either
[G3 Auto], [F4800], and [G4 Auto].
G3 Auto
Resolution Select a resolution level to be used for
transmission, from among [Panel],
[Standard], [Fine], [Superfine (400dpi)],
and [Superfine (600dpi)]. With [Panel]
selected, the resolution level selected on
the control panel is used.
Panel
Cover Note Specify whether or not to attach a Cover
Note. If you select [On], then select a
comment for a recipient and/or a sender.
NOTE: Unless registered beforehand,
comments cannot be selected. For
information on how to register comments,
refer to Comments on page 253.
Off
Maximum Image Size Select the maximum image size,
depending on recipients’ paper size, from
among [A3], [B4], and [A4].
A3
Delayed Start Select whether or not to specify the
transmission start time. If you select [On],
then specify the start time.
Off
Remote Mailbox Specify whether or not to send as
confidential fax documents. If you select
[On], then enter the recipient’s mailbox
number (3 digits) and password (4 digits).
Off
To Next Page
Loading...
