Xerox WorkCentre6655 - Installing Optional Software Features

Initial Setup
Xerox
®
WorkCentre
®
6655 Color Multifunction Printer 23
System Administrator Guide
Installing Optional Software Features
When you purchase an optional software feature, enable it by providing a feature installation key. Some
features come with an activation code that you use to get a feature installation key. Go to the Xerox
®
Software Activation Portal website at www.xeroxlicensing.xerox.com/fik to enter the activation code.
The website generates a feature installation key that you can use to enable the feature.
You can also install optional software features by sending a print file. You can install features on
multiple printers by sending a formatted .csv file as a print job to the printers. A Xerox representative
creates this file and provides installation instructions.
Installing a Software Feature at the Control Panel
1. At the printer control panel, press the Machine Status button, then touch the Tools tab.
2. Touch Device Settings>General>Feature Installation.
3. Click Feature Installation.
4. Under Feature Installation Key Entry, type the key.
5. Touch OK.