Paper and Media
60 Xerox
®
WorkCentre
®
6655/6655i Color Multifunction Printer
User Guide
8. Adjust the width guides until they touch the edges of the paper.
9. If the control panel prompts you, verify the paper size, type, and color in the Paper Settings screen.
Configuring Trays 1 or 2 for the Paper Length
You can adjust the lengths of trays 1 and 2 to accommodate A4/Letter and Legal paper sizes. In the
Legal length settings, the trays protrude from the front of the printer.
To change the 550-sheet feeders in trays 1 and 2 to match the paper length:
1. Remove all paper from the tray.
2. To remove the tray from the printer, pull out the tray until it stops, lift the front of the tray slightly,
then pull it out.
3. To extend the tray, with one hand, hold the back of the tray. With the other hand, at the front of
the tray, press the release latch and pull the ends outward until they latch.
To Next Page
Loading...
