4
Installation
Copier location
For reliable copier operation and copy quality, Xerox recommends:
• Place your copier in a well-ventilated room.
• Recommended environment:
– Temperature: 50°F to 90°F / 10°C to 32°C.
– Humidity: 20% to 85%.
• Place the copier on a flat, level surface.
• Avoid locations that subject the copier to:
– Direct sunlight.
– Extreme changes in temperature or humidity.
After selecting a location that meets the conditions listed above, ensure
that there is sufficient space around the copier.
XC811/822/830/855/1033/1044 copiers XC875/1045/1245 copiers
Helpful hint
• Avoid placing clips or staples on any copier surface.
737mm
932mm
21mm
21mm
To Next Page
Loading...
