30
Copier Care
Cleaning the Document Glass and Cover
Keeping the document glass clean helps ensure the best possible copies.
Xerox suggests that you clean the document glass at the start of each day
and during the day as needed.
CAUTION: Do not pour or spray water directly onto any part of the copier.
1. Slightly dampen a soft lint-free cloth or
paper towel with water.
2. Lift the document cover.
3. Wipe the surface of the document glass
until it is clean and dry.
4. Wipe the underside of the white
document cover until it is clean and dry.
5. Close the document cover.
Additional Steps for XC855/ XC875/
XC1044/ XC1045/ XC1245 copiers only
1. Lift the SDF cover.
2. Wipe SDF roller and the SDF glass until
each is clean and dry.
To Next Page
Loading...
Need help?
General
