22
Paper Tray Bypass (XC811/ XC822/ XC830/ XC855/ XC1033/
XC1044)
Use the Paper Tray Bypass to copy onto paper that is different from that
loaded in the copier and to copy onto special stock such as labels or
transparencies.
The maximum copy paper size is 216×356mm. The minimum copy size is
89×140mm.
Predrilled paper: holes toward the front of
the copier.
Letterhead paper: face up with the top
toward the left.
Transparencies: one sheet at a time.
• Use labels and transparencies specifically
designed for copiers.
Labels: face up, one sheet at a time.
1. Place the original face down and align it
with the registration guide on the
document glass and close the document
cover.
XC855/ XC1044 copiers only
The Paper Tray Bypass can only be used
with the SDF if the SDF auto start has been
disabled.
2. Adjust the bypass guide to the width of
the copy paper.
3. Insert a single sheet of paper into the
paper tray bypass.
• The paper will feed automatically.
• When copying continuously, insert the
next copy paper as soon as the
previous sheet has fed.
To Next Page
Loading...
Need help?
General
