Indicator and Button Descriptions
Table 5-1 Description of indicators and buttons on the front panel
Sign Indicator and
Button
Description
Fault
diagnosis LED
● ---: The device is operating properly.
● Error code: A component is faulty.
For details about error codes, see the
FusionServer Rack Server iBMC Alarm
Handling.
Health status
indicator
● Off: The device is powered off or faulty.
● Blinking red at 1 Hz: A major alarm has been
generated on the system.
● Blinking red at 5 Hz: A critical alarm has been
generated on the system.
● Steady green: The device is operating
properly.
FlexIO card
presence
indicator
Indicates whether the FlexIO card is detected.
● Off: The FlexIO card is not detected.
● Blinking green at 0.5 Hz: The FlexIO card is
detected but is not powered on.
● Blinking green at 2 Hz: The FlexIO card is
detected and has just been inserted.
● Steady green: The FlexIO card is detected
and the power supply is normal.
FusionServer 1288H V7 Server
Technical White Paper 5 Hardware Description
Issue 02 (2023-05-25) Copyright © xFusion Digital Technologies Co., Ltd. 12
To Next Page
Loading...
