Sign Indicator and
Button
Description
Power button/
indicator
Power indicator:
● Off: The device is powered off.
● Steady green: The device is powered on.
● Blinking yellow: The iBMC is starting. The
power button is locked and cannot be
pressed. The iBMC is started in about 1
minute, and then the power indicator is
steady yellow.
● Steady yellow: The device is in the standby
state.
Power button:
● When the device is powered on, you can
press this button to gracefully shut down the
OS.
NOTE
For different OSs, you may need to shut down the
OS as prompted.
● When the device is powered on, you can hold
down this button for 6 seconds to forcibly
power off the device.
● When the power indicator is steady yellow,
you can press this button to power on the
device.
UID button/
indicator
The UID button/indicator helps identify and
locate a device.
UID indicator:
● Off: The device is not being located.
● Blinking or steady blue: The device is being
located.
UID button:
● You can control the UID indicator status by
pressing the UID button or using the iBMC.
● You can press this button to turn on or off the
UID indicator.
● You can press and hold down this button for 4
to 6 seconds to reset the iBMC.
FusionServer 1288H V7 Server
Technical White Paper 5 Hardware Description
Issue 02 (2023-05-25) Copyright © xFusion Digital Technologies Co., Ltd. 13
To Next Page
Loading...
