49 PF1 LongPre
•None:No Function
•Torch On/Off
•Power Select
•Scan On/Off
•VOX On/Off
•Alarm on/off
•Radio on/off
You can program these keys for different functions
50 PF2 Press
•None:No Function
•Torch On/Off
•Power Select
•Scan On/Off
•VOX On/Off
•Alarm on/off
•Radio on/off
You can program these keys for different functions
51
ABR - Display Illumination
Time
ON|5|10|15|20|30|60 Time-out for the LCD backlight. (seconds)
52 Brightness 1-5 Setting the brightness of the LCD screen
53 LCD Reflex
•Normal: Normal background
•Reflex: Grey background
Setting the LCD transmissive display effect
54
AUTOLK – Automatic
Keypad Lock
OFF| 5 | 10 | 15
Set the automatic keyboard lock delay time. To prevent the
keyboard from being accidentally triggered.
When turned on, if the keyboard is not used within a
predetermined delay time, the keyboard
55 Radio Interr
•OFF: When FM radio is used, the radio will not
permit a transmission or reception.
•ON: When FM radio is used, you can still receive or
transmit on the channel.
Set the radio monitor function to listen to walker calls or not
in FM radio mode.
56 Reset – Restore defaults
•VFO:
Reset frequency only
•ALL:
Reset frequency and menu functions
Resets the radio to factory defaults, with some exceptions.
57 STOP WATCH
Activate the stopwatch function. Press the MENU key to start
timing.
58 VERSION Firmware Access hardware and firmware information for the radio
To Next Page
Loading...