XIEGU G90 - Call Sign Editor; Se�Ng Opera�Onal Frequency


This G90/S can set your call sign to be displayed on the startup screen.

There are three methods to set the frequency of G90/S. You may use the large
           
microphone.

2. 
tuning knob to select the desired character. Press the main tuning knob in

3. 


screen) to save and exit the editor interface.
These LCD screen labels will be close to, but not exactly aligned with the
buons below the screen.
4. When the radio is re-started, your callsign will be displayed on the screen.


Rotate the main knob to set the frequency required using the currently
selected step.
Main knob

18