eceiver Incremental
The G90/S has an external line input interface. When the G90/S is used for
In the system menu, select: AUX OUT VOLUM and set it to the appropriate
input levels.
1. A long press of the main tuning knob enters the RIT adjustment interface.
2.
When RIT is no longer required, reset the RIT value to 0.
level should be capable of 200mv.
Feed the external audio signal into the corresponding pin of the ACC port
In the system menu, select: AUX IN VOLUM to set the appropriate input
volume level. (see below)
1.
2.
3.
30
To Next Page
Loading...
