The appropriate transmission mode should be selected for the data mode in
When an amateur radio and a computer communicate using digital data
signals to and from digital tones. While receiving, the audio from the signal
audio signal created by the computer is sent to the radio for transmission.
as follows:
spectrum display.
PSK31
RTTY
FT8
USB
LSB
USB
For other data modes, set the radio
mode to what is commonly used for
that data mode.
*
For CAT command control of the radio from the PC we use the supplied
and install the cable driver from the Radioddity website. Now when the
35
To Next Page
Loading...
