Xilinx SP701 User Manual

The detailed FPGA connecons for the feature described in this secon are documented in the
SP701 board XDC le, referenced in Appendix B: Xilinx Design Constraints.
MIPI -CSI
The SP701 board supports MIPI-CSI. The Digilent PCAM module has been tested with this
board. MIPI-CSI interface is connected to AMP/TE Connecvity 1-1734248-5 15-pin connector
J8. MIPI-CSI interface is shown in the following gure.
Figure 14: MIPI-CSI Interface
Camera
Interface
Connector
(Master)
Spartan-7 FPGA
(Slave)
CSI_D0_P
I2C2_SCL
CSI_D0_N
I2C2_SDA
100E
100E
150E
CSI_D1_P
CSI_D1_N
100E
100E
150E
CSI_CLK_P
CSI_CLK_N
CSI_LP0_P
CSI_LP0_N
CSI_D0_N
CSI_D0_P
CSI_LP_CLK_P
CSI_LP_CLK_N
CSI_CLK_N
CSI_CLK_P
CSI_LP1_P
CSI_LP1_N
CSI_D1_N
CSI_D1_P
100E
100E
150E
X22796-050319
See the Digilent website for informaon about Pcam 5.
Chapter 3: Board Component Descriptions
UG1319 (v1.0) July 12, 2019 www.xilinx.com
SP701 Board User Guide 30
Send Feedback

Xilinx SP701 Specifications

General

Brand	Xilinx
Model	SP701
Category	Motherboard
Language	English