Xilinx VCU1525 User Manual

VCU1525 Acceleration Platform User Guide 18
UG1268 (v1.0) November 13, 2017 www.xilinx.com
Chapter 3: Board Component Descriptions
The default selected (bank 0 configuration) Quad SPI flash memory is U17. Each Quad SPI
device provides 1 Gb of nonvolatile storage.
• Part number: MT25QU01GBB8E12-0SIT (Micron)
• Supply voltage: 1.8V
• Datapath width: 4 bits
• Data rate: variable
Figure 3-2 shows the linear Quad SPI flash memory circuitry on the VCU1525 board. For
more flash memory details, see the Micron MT25QU01GBB8E12-0SIT data sheet at the
Micron website [Ref 4].
For details on bank 0 pins, see UltraScale Architecture Configuration User Guide (UG570)
[Ref 1].
The connections between the Quad SPI flash memory and the XCVU9P-L2FSGD2104E bank
0 device bank is listed in Appendix A, Master Constraints File Listing.
X-Ref Target - Figure 3-2
Figure 3-2: Quad SPI 1Gb Flash Memory
X20038-110617
Send Feedback

Xilinx VCU1525 Specifications

General

Brand	Xilinx
Model	VCU1525
Category	Microcontrollers
Language	English