Xilinx Zynq UltraScale+ User Manual

Zynq UltraScale+ VCU TRD User Guide 17
UG1250 (v2019.1) May 29, 2019 www.xilinx.com
Chapter 2: Targeted Reference Design Details
°
Output Sink: Video is played on HDMI TX and audio is played on I2S TX
PL 10G HDMI Video Capture and HDMI Display
This module enables capture of video from an HDMI RX Subsystem implemented in the PL.
The video can be displayed through HDMI TX through the PL, and recorded in SD cards or
USB/SATA drives. The module can Stream-in or Stream-out encoded data through the 10G
Ethernet interface.
PL HDMI Video Capture and HDMI Display with SDSoC Support
The design has SDSoC™ tool support along with PL 10G HDMI Video Capture and HDMI
Display. The video stored in SD cards or USB/SATA drives is decoded and displayed on
HDMI TX. This module can Stream-in or Stream-out encoded data through an Ethernet
interface. It also supports raw pipeline (v4l2src > accelerator > display) playback.
The SDSoC tool allows estimating the performance increase, using high-level synthesis
(HLS) to create RTL from a C algorithm, and automatically inserts data movers along with
the required drivers.
PL SDI Video Capture and SDI Display with Audio
This module captures audio/video from the SDI RX Subsystem and playback of audio video
through the SDI TX Subsystem implemented in the PL. It can record encoded audio/video
streams in SD cards or USB/SATA drives. This module can Stream-in/out the audio video
data through an Ethernet interface.
PL SDI Video Display
This module enables the video display to the SDI TX Subsystem implemented in the PL. The
video stored in SD cards or USB/SATA drives is decoded and displayed via SDI TX. This
module can Stream-in encoded data through an Ethernet interface and decode and display
it on SDI TX.
PL SDI Video Capture
This module enables capture of video from an SDI RX Subsystem implemented in the PL into
a file or to Stream-out video. The video captured from the SDI RX Subsystem is encoded
and stored in SD cards or USB/SATA drives. The module can Stream-out encoded data
through an Ethernet interface.
Send Feedback

Xilinx Zynq UltraScale+ Specifications

General

Manufacturer	Xilinx
Model	Zynq UltraScale+
Category	SoC
Processor Cores	Quad-core ARM Cortex-A53, Dual-core ARM Cortex-R5
FPGA Fabric	UltraScale+ FPGA
Memory Interfaces	DDR4, DDR3, LPDDR3, LPDDR4
Connectivity	Gigabit Ethernet, USB 3.0, SATA, PCIe
Video Codecs	H.264
Power Consumption	Varies depending on specific device configuration and usage
Operating Temperature	Commercial: 0°C to +85°C, Industrial: -40°C to +100°C