Xinje VB5N Series - Product Technical Specification

VB5N series inverter
7
1-2. Product technical specification
1. Technical specification
220V
Type VB5N-2_ _ _
0P7
Output
Match Motor (kW)
0.75
Rated Output Current (A)
4.7
Rated Voltage (V)
AC 200
Frequency Range (Hz)
0~500
Frequency Resolution (Hz)
0.01
Overload Ability
150%Rated Current for 1 minutes，180% Rated Current for 1 second
Input
Rated Voltage/Frequency
Single-phase 220V,50/60Hz
AC voltage permit fluctuate range
Voltage: -15% ~ +15%
Voltage Unbalance Rate: < 3%
Frequency fluctuate Range
Frequency：±5 %
Power Capacity (kVA )
1.5
380V
Common characteristics
Environment
Application environment
In-door, free from direct sunlight, dust, corrosive gas, oil mist, steam, water drop etc
Elevation
Lower than 1000m (The inverter should be derated when the elevation is higher than
1000m )
Ambient Temperature
-10℃ ~ +40℃
Humidity
Less than 90% RH, No condensation
Vibration
Less than 5.9 m/s
2
(0.6M)
Storage Temperature
-20℃ ~ +60℃
Structure
Protect Configuration
IP20 (In the state of state display units or keyboard)
Cooling Manner
Fan cooling
Installation
Wall mounted or install inside cabinet
Type VB5N-4_ _ _
2P2
3P7
output
Suitable motor (kW)
2.2
3.7
Rated current (A)
6.0
9.6
Rated voltage ( V)
AC 380
frequency range (Hz)
0~500
frequency accuracy (Hz)
0.01
Overload Ability
150% Rated Current for 1 minute, 180% Rated Current for 1 second
Input
Rated voltage
/Frequency
Three phase 380V; 50Hz/60Hz
AC voltage fluctuate range
Voltage：-15% ~ +15%
Voltage Unbalance Rate：<3%
Frequency fluctuate range
Frequency: ±5 %
Power Capacity (kVA )
3.0
5.9