Technical Support US: 888-443-2751 Technical Support INTL: 316-943-2751
24
OVEN ONLY ROUGH-IN SPECIFICATIONS
NOTE
Utilities must be easily accessible when the ovens are in the installed position. Do not
install utilities behind the ovens.
3.00 [76]
From back of
oven to wall
6.00 [152]
minimum
clearance
6.00 [152]
minimum
clearance
These ovens are suitable for installation on either combustible or non-combustible floors,
and adjacent to either combustible or non-combustible walls. The motor cover is designed to pro-
vide the proper clearance to the back of the oven. The minimum side clearances are 3in/76mm,
measured from the back of the oven and 6in/152mm from the end of the conveyor.
NOTE
All installations must conform to local building and mechanical codes. It is required
that the ovens be placed under a ventilation hood to provide exhaust ventilation and
adequate air supply.
NOTE
Equipment must be installed with cord anchorage to relieve strain on conductors,
twisting of terminals, and abrasions to insulation.
To Next Page
Loading...
