Technical Support US: 888-443-2751 Technical Support INTL: 316-943-2751
68
HOOD ASSEMBLY
1. Shut off main manual gas valve
2. Unplug electric cord
3. Unplug gas line
4. Unlock casters
5. Disconnect restraint
6. When hood assembly is complete, move ov-
en to original location
7. Connect restraint
8. Lock casters
9. Plug in electric cord
10. Plug in gas line
11. Turn manual gas valve on
12. Follow normal lighting instructions
Oven must be cool and the electric cord unplugged before hood assembly begins
If the oven is to be removed from its installed location for hood assembly and
installation, the following procedure is to be followed:
DANGER
CAUTION
TIP
Read and understand the next 19 pages first. They illustrate how to install the components
of the hood and shroud.
To Next Page
Loading...
