26
30 3241 BALL UNIVERSAL 5.8 MM HEX (4)
30 8037 COMPOSITE PISTONS 4-HOLE 1.0-1.2MM, 3-HOLE 1.0-1.2MM
30 8043-O ULP ALU SHOCK ADJUSTABLE NUT - ORANGE (2)
30 8082 T4 SHOCK ABSORBER MEMBRANE (4)
30 8092 T4 SHOCK FOAM INSERTS (4)
30 8308-O ULP ALU SHOCK ABSORBER-SET - ORANGE (2)
30 8316 SHOCK BALL JOINT - OPEN (4)
30 8324 ULP ALU SHOCK BODY (2)
30 8327-O ALU CAP FOR XRAY SHOCK BODY - ORANGE
BAG
965023
C 2.3
30 8334 ULP COMPOSITE SHOCK PARTS
30 8354-O ULP ALU SHOCK CAP-NUT WITH VENT HOLE - ORANGE (2)
30 8364 T4 HARDENED SHOCK SHAFT FOR ALU SHOCKS (2)
30 8275 XRAY SPRING-SET C=2.5
96 5023 E-CLIP 2.3 (10)
97 0131 O-RING 13 x 1.0 (10)
97 2030 SILICONE O-RING 3 x 2 (10)
1.1
1.2
1.3
1.1
1.2
1.3
308334
303241
303241
308354-O
308092
308082
308037
308324
970131
972030
308037
308043-O
308327-O
308316
308334
965023
965023
308364
308275
4 holes Ø1.1mm
INITIAL SETTING
#308029
ULP ALU PROGRESSIVE SHOCK SYSTEM - SET (2)
#308031-O
ALU XRAY SHOCK SPRING RETAINING COLLAR - ORANGE (4)
Progressive shock system for touring cars for improved traction
and steering characteristics. Shock insert with 3 triangular cutouts
used with piston WITHOUT holes. The hardness of the shock is
influenced not by the holes in the piston, but rather by the insert.
6. SHOCK ABSORBERS
XRAY SPRINGS
#308263 C = 2.3-2.6 OPTION
#308264 C = 2.5-2.8 OPTION
#308274 C = 2.3 OPTION
#308275 C = 2.5 INCLUDED
#308286 C = 2.6 OPTION
#308276 C = 2.7 OPTION
#308288 C = 2.8 OPTION
#308277 C = 2.9 OPTION
To Next Page
Loading...
Need help?
General
