21
STEERING SYSTEM
VIDEO TECH TIP
▶
940508
BB 5x8x2.5
2x
L=R
902306
SH M3x6
902303
SH M3x4
303137-K
SHIM 3x7.5x2
303122-K
SHIM 3x6x1
approx. 14.5mm
NOTE ORIENTATION
(outside)
NOTE ORIENTATION
(outside)
4mm THREAD
4.2mm BALL
1mm
STEERING LINKS
SERVO LINK
Adjust servo link to fit your servo.
26.3mm
2x
2x
L=R
THREAD
THREAD
Install the pivot balls with Professional
Multi Tool (HUDY #183011).
#302612-O
ALU ADJ. TURNBUCKLE M3 L/R
39mm ORANGE - SWISS 7075 T6 (2)
#302610
ADJ. TURNBUCKLE L/R 39mm
HUDY SPRING STEEL (2)
#303138-K or 303138-O
ALU SHIM 3x7x2.0mm (10)
Do not use for initial setting
4. STEERING
THREAD
THREAD
NOTE ORIENTATION
Round ball joint on the long side.
NOTE ORIENTATION
Ball joint open
NOTE ORIENTATION
Ball joint open
NOTE
ORIENTATION
NOTE
ORIENTATION
BEARING OIL
(HUDY #106230)
BEARING OIL
(HUDY #106230)
3x7.5x2mm
3x6mm
3x6mm
3x4mm
OIL
OIL
OIL
5x8x2.5mm
5x8x2.5mm
OIL
The steering lock is adjusted by the size of the shim
which attaches to the bottom of the steering.
The kit includes a 7.5mm OD shim, which limits the
physical steering lock to approx. 26 degrees.
An optional 7mm shim is offered, to be able to achieve
28 degrees of steering lock.
Running no shim will allow up to 30 degrees of
steering lock. More steering lock will increase steering,
especially in tight corners, but it will also reduce
cornering speeds, and will make the car more difficult
to drive.
To Next Page
Loading...
Need help?
General
