22
STEERING SYSTEM
VIDEO TECH TIP
▶
306219
SHIM 3x6x2
902305
SH M3x5
903305
SFH M3x5
2mm
2mm
10mm THREAD
4.9mm BALL
4mm THREAD
4.9mm BALL
HUDY ALU SERVO HORNS
#293501 KO, Sanwa - 23T
#293502 Hitec - 24T
#293503 Futaba - 25T
HUDY CLAMP ALU SERVO HORNS
#293407 KO, Sanwa - 23T
#293408 Hitec - 24T
#293409 Futaba - 25T
ALU SERVO HORNS - OFFSET
#293491 KO, Sanwa - 23T
#293492 Hitec - 24T
#293493 Futaba - 25T
CLAMP ALU SERVO HORNS - OFFSET
#293401 KO, Sanwa - 23T
#293402 Hitec - 24T
#293403 Futaba - 25T
For more in-corner steering and better steering response, aluminum servo horns may be used.
IMPORTANT!
When an aluminum horn is used, the steering servo saver is not used. This increases the risk of breaking the servo in serious crashes.
HUDY ALU SERVO HORNS
#293497 KO, Sanwa - 23T
#293498 Hitec - 24T
#293499 Futaba - 25T
HUDY CLAMP ALU SERVO HORNS
#293404 KO, Sanwa - 23T
#293405 Hitec - 24T
#293406 Futaba - 25T
#302590
ALU DUAL SERVO SAVER SCREW M3x7 (2)
The optional screw removes excessive radial play
from the steering.
#302571
X4 GRAPHITE STEERING PLATE SET
The optional graphite bridge stiffens the steering
assembly and improves initial steering response.
This option is mainly recommended for medium - to
high-grip carpet racing.
#302664
COMPOSITE BALL JOINT 4.9mm
UNIDIRECTIONAL - OPEN (4)
INITIAL SETTING
H = (24T)
F = (25T)
K = (23T)
4. STEERING
To Next Page
Loading...
Need help?
General
