Xray XB808 User Manual

12
TOE-IN
ANTI-SQUAT
ROLL CENTER
909395
SS 3.5x45
909372
SS 3.5x22
FRONT VIEW
R
33 3450 ANTI-ROLL BAR BALL JOINT 5.8 MM (2)
35 2002 XB808 DIFF BULKHEAD BLOCK SET FRONT/REAR
35 2460 PIVOT BALL 5.8 (10)
35 2470 BALL JOINT 5.8 (8)
35 3114 XB808 COMPOSITE REAR LOWER SUSPENSION ARM
35 3302 XB808 COMPOSITE REAR LOWER SUSP. HOLDERS SET
35 3371 XB808 SET OF COMPOSITE LOWER ARM SHIMS
35 3486 XB808 REAR ANTI-ROLL BAR 2.6MM
35 7213 XB808 LOWER INNER PIVOT PIN SCREW 4MM (2)
90 1303 HEX SCREW SB M3x3 (10)
90 1305 HEX SCREW SB M3x5 (10)
90 1312 HEX SCREW SB M3x12 (10)
90 1408 HEX SCREW SB M4x8 (10)
90 2318 HEX SCREW SH M3x18 (10)
90 3308 HEX SCREW SFH M3x8 (10))
90 9372 SCREW PHILLIPS SS 3.5x22 (10)
90 9395 SCREW PHILLIPS SS 3.5x45 (10)
96 0040 NUT M4 (10)
BAG
3.5x22
3.5x45
REAR ANTI-ROLL BARS
#353482 2.2mm (OPTION)
#353484 2.4mm (OPTION)
#353486 2.6mm (STANDARD)
#353488 2.8mm
(OPTION)
3. REAR SUSPENSION
333450
352470
353114
352460
960040
353302
909372
901303
353486
353371
901408
353371
902318
901305
903308
352002
909395
357213
353302
The composite suspension holders feature preset optimum
geometry 3° rear toe-in and 2° rear anti-squat.
Use optional adjustable suspension holders for further
geometry adjustment.
Do not overtighten the screws.
Overtightening may result in
composite suspension holder
deformation.
Do not overtighten the screws.
Overtightening may result in
composite suspension holder
deformation.
901312

Xray XB808 Specifications

General

Brand	Xray
Model	XB808
Category	Motorized Toy Car
Language	English