Studer Innotec SA
Xtender
User manual V4.6.0 48
Denomination / description
Time delay between standby pulses
Battery undervoltage duration before turn off
Battery undervoltage dynamic compensation
Battery adaptive low voltage (B.L.O)
Max voltage for adaptive low voltage
Time delay before opening of transfer relay
Input voltage giving an opening of the transfer relay
with delay
Input voltage giving an immediate opening of the
transfer relay (UPS)
Battery undervoltage alarm (AUX 1)
Battery overvoltage (AUX 1)
Inverter or Smart- Boost overload (AUX 1)
Active Smart-Boost (AUX 1)
AC input presence but with fault (AUX 1)
AC input presence (AUX 1)
Transfer relay ON (AUX 1)
Bulk charge phase (AUX 1)
Equalization phase (AUX 1)
Periodic absorption (AUX 1)
Battery voltage 1 activate (AUX 1)
Battery voltage 1 (AUX 1)
Battery voltage 2 activate (AUX 1)
Battery voltage 2 (AUX 1)
Battery voltage 3 activate (AUX 1)
Battery voltage 3 (AUX 1)
Battery voltage to deactivate (AUX 1)