1. Micro USB: Battery charge or data synchronization with PC or DC.
2. DB15 Port: This port is used to connect to the main test cable.
3. Power Button: Long press to power on or off. In the power-on state,
short press the button to make the device enter the sleep mode.
TECHNICAL SPECIFICATIONS
Table 1-1 Specification
Quad-core 1.6GHz Processor
7.0-inch touch screen with 1024 × 600
resolution
Gravity sensor, light sensor
Microphone, speakers, 4-band 3.5mm
stereo/standard headset jack
4000mAh, 3.7V lithium-polymer battery
To Next Page
Loading...
