The main battery is replaced. Battery matching must be performed to clear original low battery information and
prevent the related control module from detecting false information. If the related control module detects false
information, it will invalidate some electric auxiliary functions, such as automatic start & stop function, sunroof without
one-key trigger function or power window without automatic function.
Battery matching is performed to re-match the control module and motoring sensor to detect battery power usage
more accurately, which can avoid an error message displayed on the instrument cluster.
The operation guidelines of the BMS Reset function are shown as below:
1. Enter the BMS Reset menu and choose relevant models according to the vehicle being tested.
2. Turn on the ignition switch.
3. Press OK to continue the BMS function.
4. Enter battery capacity (within the given range) and press OK after the input.
5. Enter the battery manufacturer and press OK after the input.
6. Enter the 10-digit battery serial number and press OK after the input.
To Next Page
Loading...
Need help?
General
