Language
Unit
My Workshop Info
Firmware Information
About
LANGUAGE
The languages supported by this device are listed in Settings. In areas outside the English area, the default language is
English and the local official language. Users can switch between English and local official languages on the device by
themselves. If you need to switch to other languages, please contact XTOOL technical support at
supporting@XTOOLtech.com to unbind the current language configuration and rebind it to the desired language
configuration. After the configuration is successfully changed, you can switch the target language.
⚠ This will only change the language of the APP. If you want to change the system language, please go to Android Settings.
How to change the language of your software?
Step1: Contact your dealer or XTOOL Support and leave a message about the language you need and the S/N of
your device. A technician will modify the language configuration for you in the background. Wait for a response from
the technician indicating Step 1 is complete.
Step2: Settings->Language->Choose language
Step3: OS Settings->Language & input->Choose Language
Step4: Back to Updates to pull all packages again
UNITS
You can switch the units used by the system. Scan tool provides you with Metric, Imperial, and US units. You can
directly click on the unit you need. After the switch is successful, a blue checkmark will be displayed behind the unit’s
name.
To Next Page
Loading...
Need help?
General
