VESDA by Xtralis VESDA VLI Product Guide
www.xtralis.com 17
3 Installation
The VLI detector is shipped with the following components:
l 1 VLI detector
l 1 Mounting bracket
l 1 Ferrite core for connection using Ethernet cable
l Multilingual Installation Sheet
l 1 End of Line resistor with the VLI-885 detector
Check all components for damage and refer any concerns to your authorized representative.
Depending on the nature of the installation, it may be necessary to procure the following items:
l Screws and inserts for the mounting bracket that are appropriate for the installation location.
l Type A to Type B USBInterface Lead, if configuration of the detector is to be done via the USBinterface.
l Standard Ethernet cable if configuration of the detector is to be done via the Ethernet interface.
l A High Level Interface (HLI), where it is necessary to connect to a VESDA VLI on VESDAnet.
Figure 3-1: Type A to Type B USBInterface Lead
To Next Page
Loading...