For information call (800) 497-1704 Page 49
XR1255 Operation
Pre-Operation Inspection Checklist
Walk around the ENTIRE forklift while visually performing the pre-operation inspection.
Check that “Do Not Operate” tags have not been placed on the forklift.
Check that load capacity charts are legible.
Check that frame level indicator is working properly.
Check condition and operation of the seat belt and mounting hardware.
Check that Operation and Safety Manual is in the protective case and legible.
Check forks for welds, cracks, misalignment, or any other damage.
Check that carriage assembly crossbar is straight and in place to prevent forks from changing position or coming o
the carriage.
Check all hydraulic hoses and hose connections for wear or leaks.
Check tilt cylinder for leaks or any other damage.
Check boom for straightness or any other damage.
Check all four (4) tires and wheels for:
Punctures, cracks, cuts, gouges, bulges, foreign objects, or any other damage to tires.
Loose or missing lug nuts.
Bent anges or any other damage to rims.
Check front and rear sway cylinders and hoses for leaks or any other damage.
Check mirrors for cracks, cleanliness, and proper adjustment.
Check hydraulic reservoir sight gauge for proper uid level. Add hydraulic uid, if necessary.
Check engine compartment for:
Loose or damaged belts, hoses, and radiator blades.
Coolant reservoir level. Add radiator coolant, if necessary.
Engine oil level. Add engine oil, if necessary.
Electrical wires and connectors.
Check transmission uid level.
Check front and rear axles for leaks or any other damage.
Check main boom cylinders and hydraulic lines for leaks or any other damage.
Check battery terminals for corrosion.
Check battery for cracked, melted, or damaged case.
Check electrical connections on rear sway cylinder.
Check that all labels are legible. Replace any damaged or illegible labels.
Check that operator’s cab is empty of all trash, debris, or any loose items.
Check that personal belongings are secured in the personal storage box.
Check that pedals, and non-skid surfaces are clean and free of grease, oil, dirt, snow, or ice.
Date: __________________________ Initials: __________________________
To Next Page
Loading...
Need help?
General
