94
Setting the language 2.5
The ex-factory default language setting is English.
After the device is switched on and the start-up process is complete, the main menu appears (Fig. 6).
Fig. 6
Using <SYS> or <MODE>, you navigate to the system settings («System settings»).
The very first menu is to be used for setting the language (Fig. 7).
Fig. 7
Use <ENTER>/<OK> to call the menu.
Select the language using the arrow keys <↑↓>.
Confirm with <ENTER>/<OK>.
Fig. 8
The selected language will appear immediately (Fig. 8).
Pressing <ESC> twice will return the user to the main menu.
To Next Page
Loading...
